Barrels & Accessories

5 Gallon / 25 Litre Pressure Barrel With Handle, Dispensing Tap & LCD Temperature Indicator Strip   The Barrel Comes Fitted With A Balliiho..

5 Gallon / 25Litre Pressure Barrel With Handle And LCD Temperature Indicator.   The Barrel Comes Fitted With A Balliihoo 2" Control Cap, Th..

5 Gallon (23 Litre) Heavy Gauge Food Grade Plastic Barrel With 2 Sturdy Lifting Handles. Height Including Valve 47cm. The Barrel Comes Fitted ..

5 Gallon (23 Litre) Heavy Gauge Food Grade Plastic Barrel With 2 Sturdy Lifting Handles. Height Including Valve 47cm. The Barrel Comes Fitted ..

The Balliihoo 2 Inch Control Cap Is Ideal For Those Wanting To Upgrade Any Standard Basic Barrel With A Two Inch Cap - To Enable The Topping Up Of Co2..

The Balliihoo 2" Control Cap (To Fit All Standard Barrels With A 2 Inch Opening) Has A Standard Over Pressure Release Vent And A Separate Schrader Sty..

16 Gram Threaded Co2 Bulbs For Use With The Balliihoo Control Cap And Top Up Tap   Contains 16g Of Food Grade Co2 Under Pressure    ..

Fully Controllable Tap For Use With 16g Threaded Food Grade Co2 Bulbs.   Co2 Can Be Released Gently Into Your Barrel and Shut Off When Requ..

Digital Push On Pressure Gauge, Ideal For Monitoring Pressure In Any Barrel Fitted With A Balliihoo Control Cap   The Pressure Gauge Displa..

Foam Grip To Fit 16gram Co2 Bulbs   Makes It Easier To Twist And Pierce The Bulbs When Using Co2 Control Tap   Protects From The..

Plastic Bulb Holder For 8gram Co2 Bulbs   These Bulb Holders Have Been Slightly Shaved / Shortened - So That They Can Be Used With Both The..

Food Safe Silicon Based Grease With P.T.F.E   Recommended For Lubricating The Cap Seals On Pressure Barrels.   Safe To Use On An..

Brewgas L30 Cylinders Are Fully Compatible With All (Non Piercing Pin) S30 Valves.   Screws Straight Onto A S30 Valve To Deliver A Burst Of..

Brewgas L30 Cylinders Are Fully Compatible With All (Non Piercing Pin) S30 Valves. PLEASE NOTE - This Is For A Refil Only And Relies On The Re..

Disposable Co2 Single Charge Capsule For Use With 8 Gram Homebrew Co2 Pressure Top Up System.   Contains 8 Grams Of Natural Co2 Gas Under P..

Disposable Co2 Single Charge Capsule For Use With 8 Gram Homebrew Pressure Top Up System.   Contains 8 Grams Of Natural Co2 Gas Under Press..

To Fit S30 Valves (Standard for Homebrew Co2 Pressure Top Up Valves With Piercing Pin)   PLEASE NOTE: This Bulb Holder does NOT fit Soda Sy..

2" Pressure Barrel Cap With S30 Valve (Non Piercing Pin Type).   The S30 Valve Is For Use With S30 And L30 Gas Cylinders.   Not ..

2" Pressure Barrel Cap Fitted With Genuine Stainless Steel S30 Valve (Piercing Pin Type)   This Valve Cap Fits All Balliihoo Pressure Barre..

Standard 2" Vent Cap To Fit Balliihoo Pressure Barrels & All Other Barrels With 2" Openings (Not Suitable For King Keg)   Has A Small Rubbe..

Black Plastic Lever Tap With Back Nut, 1/2 Turn On/Off Operation   Can Be Used On Fermentation Buckets, Wide Neck Fermenters And King Kegs ..

Black Plastic Lever Tap With Flip Top Operation For Greater Control.   Compatible With Barrel Floats The Tap Is Ideal For Use With Top Tap ..

Replacement Lever tap, Screw Directly into Standard Brown Cider Barrels (Including The Balliihoo 5 Gallon Cider Barrel)   Fits A Threaded H..

Lever tap , Screw Directly into Standard Pressure Barrels with Threaded Hole (inc Balliihoo Barrels) Complete with Rubber Washer     Replacemen..

Complete Seal Set For Brass & Stainless Steel Co2 Pressure Top Up Valves.   Consists Of 1 x Cylinder/Bulb Sealing O-Ring, 1 x Non Return Ru..

This kit contains all the spare seals you might need for most barrels with a 2" Cap, including the Balliihoo Basic, Youngs & Wilko Barrels.     ..

This Kit Contains All The Spare Seals You Might Need For Most Barrels With A 4" Cap, This Includes King Kegs, Balliihoo Premium Barrels & Rotokegs. ..

S30 Co2 Pressure Top Up Valve (Non Piercing Pin Type)   For Use With Hambleton Bard's S30 And Also L30 Cylinders.   Not Suitable..

Genuine S30 Stainless Steel Co2 Pressure Top Up Valve With Piercing Pin.   Compatible With 8 Gram Co2 Bulbs & Incorporates A Safety Release..

Replacement Pressure Relief Rubber For Balliihoo Control Cap (Pack Of 3)   Fits Both 2 Inch And 4 Inch Control Caps. Also Fits The 2 Inch V..

Replacement O Ring Seal To Fit 2 Inch Caps.   This Seal Fits Most Standard 2" Barrel Caps, Including Balliihoo Control Caps.   I..

Replacement O Ring Seal To Fit 4 Inch Caps     The Square Section Rubber Cap Ring Is Far Superior To The Traditional "Round Section" O-Rings...

Black Barrel Handle With Pin   Direct Replacement For King Kegs, Balliihoo Premium Barrels And Wide Neck Wine Fermenters   Dimen..

Makes Tightening And Loosening Pressure Barrel Caps Easy.     Fits 4" Caps Including King Keg Top And Bottom Tap Kegs   Tony's Tips Ever t..

Long Handled Nylon Brush - Ideal For Cleaning Barrels.   34 Inch - 85cm Long Reach Gets Right To The Bottom Of Your Barrel.   Tony’..

Replacement Float For king Keg & Balliihoo Premium - Top Tap Pressure Barrels   Can Also Be Fitted To Other Barrels With Standard Type Taps..

Replacement Peircing Pin Insert For S30 Injector Valve With O ring     Converts Standard Stainless Steel S30 Valves To Use The 8 gramm Bulb Sys..

Replacement Black O Ring Seal For Hambleton Bard Safety Valve   Used On Older Roto Kegs And Hambleton Bard Barrels With 4" Caps   ..

These Orange Rubber Fit The Old Style Inlet Only Injection Valve   Not Suitable For Any Of The Newer Combined Inlet And Relief Valves Or Va..

  Black Round Section O Ring - Fits Old Style Hambleton Bard Barrels And Roto Kegs      Will Also Fit The Balliihoo 4 Inch Cap ..

Replacement O Ring Seal For Standard Home Brew Taps.   Fits Most Plastic Taps Including Balliihoo Barrels, King Kegs and Drum Taps.   ..

Pack Of 5 x Replacement Inlet Seals   Located At The Very Bottom Of Both Stainless Steel Or Brass S30 Valves, This Rubber Seal Is Designed ..

Pack Of 5 x Over Pressure Release / Vent Seals For S30 Valves.   These Vent Seals Will Fit Both The Stainless Steel And Brass S30 Valves. ..

Pack Of 5 x Replacement O-Ring Seals For S30 Valves.   These O-Rings Are For The Very Top Of The S30 Valve, It Makes A Seal With An 8 Gram ..

Pack Of 2 Flat Washers For Sealing S30 Valves To Caps.   Suitable For Both The Genuine Stainless Steel S30 Valves As Well As The Brass S30 ..

..

Replacement Black Cap For King Keg Top Tap And Bottom Tap Pressure Barrels   Has Keyed Hole For Fitting S30 Injection Valve     ..