Barrels & Accessories

Showing 1 to 47 of 47 (1 Pages)
rating

2 Gallon Barrel With Vent Cap

..

£22.00

Ex Tax: £22.00

6 In Stock
Quantity:
rating

2" Pressure Barrel Cap With Full 8 Gram CO2 Injection System & 20 Co2 Bulbs

2" Pressure Barrel S30 Valve Cap With Piercing Pin, 2 Boxes Of 10 CO2 Bulbs & Bulb Holder For Adding Additional CO2 To Your Home Brew     This Valve Cap Fits All Balliihoo Pressure Barrels & Barrels With 2" Openings (Not Suitable For King Keg).     Comes With 20 x 8 Gram CO2 Bulbs & Bulb Holder.     PLEASE NOTE - As this item c..

£21.99

Ex Tax: £21.99

19 In Stock
Quantity:
rating

2" Pressure Barrel Cap With S30 Valve (Non Piercing Pin Type)

2" Pressure Barrel Cap With S30 Valve (Non Piercing Pin Type).     The Stainless Steel S30 Valve Is For Use With Hambleton Bards S30 Gas Cylinders.     Not Suitable For Use With 8 Gram Co2 Bulb Injection System.     2" Cap Fits All Balliihoo Standard Barrels.     Tony’s Tips This is the non piercing type S30 valve with 2”..

£11.75

Ex Tax: £11.75

26 In Stock
Quantity:
rating

2" Pressure Barrel Cap With Stainless S30 Valve (Piercing Pin Type)

2" Pressure Barrel Cap Fitted With Genuine Stainless Steel S30 Valve (Piercing Pin Type)     This Valve Cap Fits All Balliihoo Pressure Barrels & Barrels With 2" Openings (Not Suitable For King Keg)     Please Note This Genuine S30 Valve Has A Floating Piercing Pin (Compatible With 8g Bulbs) Which Can Be Removed If Required & Then ..

£12.25

Ex Tax: £12.25

32 In Stock
Quantity:
rating

2" Pressure Barrel Vent Cap

Standard 2" Vent Cap To Fit Balliihoo Pressure Barrels & All Other Barrels With 2" Openings (Not Suitable For King Keg)     Has A Small Rubber Valve On The Central Lug Which Will Lift To Release Any Excess Pressure Build Up    Tony’s Tips The Standard 2” Pressure Barrel Vent Cap is just as it states.  Use specially formulated, Pressu..

£3.15

Ex Tax: £3.15

35 In Stock
Quantity:
rating

Balliihoo 4" Barrel Cap With Hole (No Valve) - Pressure Test Point & Gauge

This Balliihoo 4" Barrel Cap Comes Without A Valve Fitted And Is Ideal For Those Who Want To Upgrade Their Existing Barrels And Aready Have Valves That They Can Swap      The Cap Is Fitted With A Schrader Valve & Supplied With A Digital Push On Gauge, So That You Can Monitor Pressures Within Your Barrel. The Pressure Gauge Displays In P..

£7.99

Ex Tax: £7.99

44 In Stock
Quantity:
rating

Balliihoo 4" barrel cap with injection valve and pressure gauge

The Balliihoo 4" Barrel Cap Comes Fitted With A Genuine S30 Injection Valve Which Allows Use With 8 gram Co2 Bulbs Via A Piercing Pin, The Pin Can Be Removed To Accept Hambleton Bards Larger S30 Co2 Cylinders If Required.      The Cap Is Also Fitted With A Schrader Valve & Supplied With A Digital Push On Gauge, So That You Can Monitor Pre..

£17.99

Ex Tax: £17.99

42 In Stock
Quantity:
rating

Balliihoo 5 Gallon Pressure Barrel / Beer Keg With LCD Temperature Indicator

5 Gallon / 25Litre Pressure Barrel With Handle, Dispensing Tap & 2" Vent Cap.     Comes With LCD Temperature Indicator.     Please Note This Barrel Comes With 2" Vent Cap, To Use Co2 Injection An S30 Valve Cap Is Available - See Our Other Items.     Used For Pressurising & Dispensing Of Beer After Fermentation. Dimenti..

£28.49

Ex Tax: £28.49

50 In Stock
Quantity:
rating

Balliihoo 5 Gallon Pressure Barrel / Beer Keg With s30 Piercing Valve Cap

5 Gallon / 25Litre Pressure Barrel With Handle, Dispensing Tap & S30 Valve Cap (Piercing Type).     Comes With LCD Temperature Indicator.     This Barrel Comes With An S30 Valve Cap With Piercing Pin Which Is Compatible With The 8 Gram Co2 Injection System - See Our Other Items.     Used For Re Pressurising & Dispensing Of Beer..

£34.99

Ex Tax: £34.99

33 In Stock
Quantity:
rating

Balliihoo 5 Gallon Pressure Barrel With Full Co2 Injection System

5 Gallon / 25Litre Pressure Barrel With Handle, Dispensing Tap & S30 Valve Cap With Piercing Pin.     Comes With LCD Temperature Indicator.     This Barrel Comes With The Full 8 Gram Gas Injection System Which Includes An S30 Valve Cap With Piercing Pin, 8 Gram Bulb Holder & A Box Of 10 Co2 Bulbs.     PLEASE NOTE - As this item..

£39.99

Ex Tax: £39.99

18 In Stock
Quantity:
rating

Balliihoo King Keg Premium Barrel With Co2 Injection Valve & Pressure Indicator

5 Gallon (23 Litre) Heavy Gauge Food Grade Plastic Barrel With 2 Sturdy Lifting Handles. Height Including Valve 47cm.   The Balliihoo 4" Cap Comes Fitted With Genuine S30 Injection Valve Which Allows Use With 8 gram Co2 Bulbs Via A Piercing Pin, The Pin Can Be Removed To Accept Hambleton Bards Larger S30 Co2 Cylinders If Required. The Cap..

£59.99

Ex Tax: £59.99

0 In Stock
rating

Balliihoo King Keg Premium Barrel With Co2 Injection Valve - Pressure Indicator - Co2 Bulbs - Bulb Holder

5 Gallon (23 Litre) Heavy Gauge Food Grade Plastic Barrel With 2 Sturdy Lifting Handles. Height Including Valve 47cm.     The Balliihoo 4" Cap Comes Fitted With Genuine S30 Injection Valve Which Allows Use With 8 gram Co2 Bulbs Via A Piercing Pin, The Pin Can Be Removed To Accept Hambleton Bards Larger S30 Co2 Cylinders If Required. The C..

£66.49

Ex Tax: £66.49

0 In Stock
rating

Beer Float - For King Keg And Balliihoo Premium Top Tap Pressure Barrels

Replacement Float For king Keg & Balliihoo Premium - Top Tap Pressure Barrels     Can Also Be Fitted To Other Barrels With Standard Type Taps     The Float System Will Only Work While The Keg Is Pressurised     This New Improved Style Float Has An Easy Tap Plug (With O-Ring Seal) And A Swivel At The Float End.     Tony’s T..

£4.29

Ex Tax: £4.29

24 In Stock
Quantity:
rating

Black O Ring For S30 Safety Valve - For Hambleton Bard Barrels

Replacement Black O Ring Seal For Hambleton Bard Safety Valve     Used On Older Roto Kegs And Hambleton Bard Barrels With 4" Caps     Please Note This Is The O Ring Only, The Valve Is Not Included Tony's Tips As usual, always keep a Spare, you never know! a whole Barrel may be affected if the "O" ring becomes worn or suddenly bre..

£0.79

Ex Tax: £0.79

19 In Stock
Quantity:
rating

Brewgas Delux Sparkler Tap

Black Plastic Lever Tap With Flip Top Operation For Greater Control.     Compatible With Barrel Floats The Tap Is Ideal For Use With Top Tap King Kegs     Fits into a 1" (25 mm) Hole And Has Back Nut and Washer to Secure into Position     The Sparkler Nozzle Fitted To The Spout Will Allow Control Over The Type Of Head You Requi..

£15.99

Ex Tax: £15.99

7 In Stock
Quantity:
rating

Brewgas L30 - S30 Co2 Cylinder (Replacements For Hambleton Bard S30 Cylinders)

Brewgas L30 Cylinders Are Fully Compatible With All (Non Piercing Pin) S30 Valves. Screws Straight Onto A S30 Valve To Deliver A Burst Of Co2. Not Compatiblle With Piercing Pin Type Valves     Contains Approx 30 x One Second Shots.     Balliihoo Homebrew Will Accept Either Brewgas L30 Cylinders Or (Now Discontinued) Hamblet..

£27.50

Ex Tax: £27.50

26 In Stock
Quantity:
rating

Brewgas L30 - S30 Co2 Cylinder REFILL (Replaces Hambleton Bard S30 Cylinders)

Brewgas L30 Cylinders Are Fully Compatible With All (Non Piercing Pin) S30 Valves. PLEASE NOTE - This Is For A Refil Only And Relies On The Return Of An Empty Good, Serviceable Brewgas Or Hambleton Bard Cylinder. You Will Need To Send Your Empty Cylinder In To Us Before We Will Ship The Full Cylinder. PLEASE NOTE - We Do Not Accept Rusty,..

£6.90

Ex Tax: £6.90

26 In Stock
Quantity:
rating

Co2 8 Gram Injection Bulbs - Pack of 10

Disposable Co2 Single Charge Capsule For Use With 8 Gram Homebrew Injection System.     Contains 8 Grams Of Natural Co2 Gas Under Pressure.     Requires Threaded Bulb Holder For Use     PLEASE NOTE - As this item contains pressurised containers it cannot be sent by Royal Mail & therefore must be shipped by "LAND COURIER" only..

£4.20

Ex Tax: £4.20

42 In Stock
Quantity:
rating

Genuine S30 - 8 Gram Co2 Bulb Holder

To Fit S30 Valves (Standard for Homebrew Co2 Injection Barrels With Piercing Pin)     PLEASE NOTE: This Bulb Holder does NOT fit Soda Syphons/Sparklets, the thread is different.     Threaded Bulb Holder Required for attaching 8 Gram Co2 Bulbs to Pressure Barrels with Piercing Valve Attachments.     Stainless Steel Insert For Ea..

£4.35

Ex Tax: £4.35

20 In Stock
Quantity:
rating

Handle For Premium Barrel, King Kegs And Fermenters

Black Barrel Handle With Pin Direct Replacement For King Kegs, Balliihoo Premium Barrels And Wide Neck Wine Fermenters Dimentions Of The Grip Approx 130mm x 75mm - Pin Diameter 8mm..

£1.99

Ex Tax: £1.99

15 In Stock
Quantity:
rating

King Keg Bottom Tap 5 Gallon Barrel With Balliihoo Cap - Pressure Indicator - Bulbs & Holder

King Keg Bottom Tap Body, But Fitted With The All New Balliihoo 4" Cap & Supplied With A Pack Of 10 Co2 Bulbs And Genuine S30 Bulb Holder With Stainless Steel Thread.     The Balliihoo Cap Comes With Genuine S30 Piercing Valve, A Schraeder Valve & Digital Tyre Gauge So That You Can Monitor The All Important Pressure Changes Within Your Ba..

£65.99

Ex Tax: £65.99

3 In Stock
Quantity:
rating

King Keg Bottom Tap 5 Gallon Pressure Barrel With Balliihoo Cap & Pressure Indicator

King Keg Bottom Tap Body, But Fitted With The All New Balliihoo 4" Cap.     The Balliihoo Cap Comes With Genuine S30 Piercing Valve, A Schraeder Valve & Digital Tyre Gauge So That You Can Monitor The All Important Pressure Changes Within Your Barrel & An Improved New Type Square Section Seal.     The Genuine S30 Valve Is Supplied As S..

£58.99

Ex Tax: £58.99

3 In Stock
Quantity:
rating

O Ring Seal for Hambleton Bard 4-inch Barrel Caps

Black Round Section O Ring - Fits Old Style Hambleton Bard Barrels And Roto Kegs  Will Also Fit The Balliihoo 4 Inch Cap..

£1.65

Ex Tax: £1.65

4 In Stock
Quantity:
rating

Piercing Pin And O ring For Stainless S30 Valve

Replacement Peircing Pin Insert For S30 Injector Valve With O ring     Converts Standard Stainless Steel S30 Valves To Use The 8 gramm Bulb System (requires bulbs and holder)     This Will Only Fit The Genuine S30 Stainless Steel Valves..

£1.99

Ex Tax: £1.99

20 In Stock
Quantity:
rating

Plastic Cap Spanner For 4 Inch Barrel Caps

Makes Tightening And Loosening Pressure Barrel Caps Easy.     Fits 4" Caps Including King Keg Top And Bottom Tap Kegs   Tony's Tips Ever tried to undo a cap thats been tightly screwed to the barrel 12 months ago? . . . . or even 2 minutes ago! Running hot water over the Cap and Barrel is of course an option, as the cap expands it eases ..

£2.50

Ex Tax: £2.50

132 In Stock
Quantity:
rating

Plastic Co2 Bulb Holder - For Use With S30 Injection Valves

Plastic Bulb Holder For 8gram Co2 Bulbs   These Bulb Holders Have Been Slightly Shaved / Shortened - So That They Can Be Used With Both The Older Brass Type Injection Valves & Also The New Stainless Steel Injection Valves...

£3.95

Ex Tax: £3.95

20 In Stock
Quantity:
rating

Pressure Barrel Seal Grease - 45ml

Food Safe Silicon Based Grease With P.T.F.E     Recommended For Lubricating The Cap Seals On Pressure Barrels.     Safe To Use On Any Other Equipment Where Lubricant May Come In Contact With Drink.   Tony's Tips Beats using Petroleum Jelly!  No more searching around the Bathroom or even Worse, the Bedroom Cupboards for a Hopeful..

£2.49

Ex Tax: £2.49

6 In Stock
Quantity:
rating

Replacement O-Ring Seal / Washer For Barrel Tap

Replacement O Ring Seal For Standard Home Brew Taps.     Fits Most Plastic Taps Including Balliihoo Barrels, King Kegs and Drum Taps.     Tony’s Tips The unassuming Replacement O-ring Seal / Washer for your Barrel Tap is another highly critical part of the brewing Kit. Keep a spare or two on the shelf of spares along-side your spare Co..

£0.99

Ex Tax: £0.99

416 In Stock
Quantity:
rating

Replacement Pressure Release Seal For 2 Inch Vent Cap - Pack Of 3

  Replacement Pressure Relief Rubber For 2 Inch Vent Cap (Pack Of 3) Fits Over The Plastic Lug In The Centre Of The Cap Covering The Vent Hole. PLEASE NOTE - Cap Not Included (This is Just The Replacement Seals)  ..

£1.00

Ex Tax: £1.00

22 In Stock
Quantity:
rating

Replacement Red 4 Inch Cap For Old Type Hambleton Bard Pressure Barrels

Replacement 4 Inch Cap Fits The Old Stlyle Hambleton Barrels This Cap Has Two Holes, One For The Old Style Injection Only S30 Valve And One 10mm Hole For The Pressure Releif Valve Please Note The Old Stlye Valves Are No Longer Available, So This Cap Is Only Suitable As A Replacement If You Have The Existing Valves To Swap Over..

£3.99

Ex Tax: £3.99

1 In Stock
Quantity:
rating

Replacement Seal For 2 Inch Barrel Caps

Replacement O Ring Seal To Fit 2 Inch Caps.     This Seal Fits Most Standard 2" Caps Including All Balliihoo Barrel Caps.     It Is Recommended These Seals Are Replaced Regularly To Maintain A Gas Tight Seal.     Tony’s Tips These 'O' Ring Seals  to fit 2 Inch Caps work well when screwed down finger tight and thinly smeared all ..

£1.28

Ex Tax: £1.28

0 In Stock
rating

S30 Black Inlet Rubbers - Pack Of 10

..

£4.70

Ex Tax: £4.70

21 In Stock
Quantity:
rating

S30 Pressure Release Rubbers - Pack of 10

Pack Of 10 x Over Pressure Release / Vent Seals For S30 Valves...

£4.70

Ex Tax: £4.70

0 In Stock
rating

S30 Replacement O ring - Pack Of 10

..

£6.50

Ex Tax: £6.50

11 In Stock
Quantity:
rating

S30 Stainless Co2 Injection Valve With Piercing Pin

Genuine S30 Stainless Steel Injection Valve With Piercing Pin.   Compatible With 8 Gram Co2 Bulb System & Incorporates A Safety Release Valve.   Please Note This Genuine S30 Valve Has A Floating Piercing Pin (Compatible With 8g Bulbs) Which Can Be Removed If Required & Then Becomes Compatible With Hambleton Bards Larger S30 Co2 Cylinder..

£10.99

Ex Tax: £10.99

52 In Stock
Quantity:
rating

S30 Stainless Steel Co2 Injection Valve (Non Piercing Pin Type)

Genuine S30 Co2 Injection Valve (Non Piercing Pin Type)     For Use With Hambleton Bard's S30 Cylinders.     Not Suitable For 8g Bulb System     Tony’s Tips These Stainless Steel S30 Injection Valves with pressure release come as “Standard” shown here, without Piercing Pin for use with the S30 Screw on CO2 Cylinder that I’ve suc..

£10.25

Ex Tax: £10.25

51 In Stock
Quantity:
rating

S30 Valve To Cap Sealing Washer - Pack Of 2

  Pack Of 2 Flat Washers For Sealing s30 Valves To Caps Suitable For Both THe Genuine Stainless Steel S30 Valves As Well As The Brass S30 Valves For Fitting,  Keep Clean And Dry, Do Not Apply Any Grease And Avoid Overtightening  ..

£1.20

Ex Tax: £1.20

30 In Stock
Quantity:
rating

Seal Set For S30 Co2 Injection Valves - Replacement Rubbers

Complete Seal Set For Brass & Stainless Steel Co2 Injection Valves.     Consists Of 1 x Injector Sealing O-Ring, 1 x Non Return Rubber, 1 Valve To Cap Sealing Washer & 1 x Pressure Relief Rubber - Diagram & Instructions Included.     These Seals Are Suitable For Brass Piercing & Non Piercing Valves As Well As The Newer Type Genuine S3..

£2.50

Ex Tax: £2.50

14 In Stock
Quantity:
rating

Spare Lever Tap For Brown Cider Barrel

Replacement Lever tap, Screw Directly into Standard Brown Cider Barrels (Including The Balliihoo 5 Gallon Cider Barrel)     Fits A Threaded Hole Approx 30mm In Diameter     Supplied Complete with Rubber Sealing Washer.       Not Compatable With Standard, White And Brown Pressure Barrels     Tony’s Tips I prefer the le..

£3.59

Ex Tax: £3.59

21 In Stock
Quantity:
rating

Spare Lever Tap for Pressure Barrels

Lever tap , Screw Directly into Standard Pressure Barrels with Threaded Hole (inc Balliihoo Barrels) Complete with Rubber Washer     Replacement Tap for all Standard Pressure Barrels with Threaded Hole.     Supplied Complete with Rubber Sealing Washer.     Fits All Balliihoo Standard Barrels.     Tony’s Tips I prefer the ..

£3.75

Ex Tax: £3.75

12 In Stock
Quantity:
rating

Spare Tap Seal For Cider Barrel Tap

..

£0.60

Ex Tax: £0.60

40 In Stock
Quantity:
rating

Square Section O Ring Seal For 4 Inch Barrel Caps

Replacement O Ring Seal To Fit 4 Inch Caps     The Square Section Rubber Cap Ring Is Far Superior To The Traditional "Round Section" O-Rings. This Ensures A Good Pressure Tight Seal Without The Need For Overtightening.     Suitable For Replacing Cap Seals On King Keg Top And Bottom Tap Barrels As Well As Rotokegs And Balliihoo Pre..

£2.50

Ex Tax: £2.50

37 In Stock
Quantity:
rating

Valve & Cap Seal Set For Pressure Barrels With 2 Inch Caps

This kit contains all the spare seals you might need for most barrels with a 2" Cap, including the Balliihoo Basic, Youngs & Wilko Barrels.     Contains Tap - Cap & All Valve Seals And Comes With Full Instruction Sheet.     (Please Note The Cap Seal In This Set Is NOT Compatible With King Keg, Rotokeg Or Balliihoo Premium Barrel) For..

£4.49

Ex Tax: £4.49

10 In Stock
Quantity:
rating

Valve & Cap Seal Set For Pressure Barrels With 4 Inch Caps

This Kit Contains All The Spare Seals You Might Need For Most Barrels With A 4" Cap, This Includes King Kegs, Balliihoo Premium Barrels & Rotokegs.     Contains Tap - Cap & All Valve Seals And Comes With Full Instruction Sheet.     (Please Note The Cap Seal In This Set Is NOT Compatible With Balliihoo Basic Barrel, Youngs Or Wilkos..

£4.99

Ex Tax: £4.99

9 In Stock
Quantity:
Showing 1 to 47 of 47 (1 Pages)

The following products are available by our automated "Click To Request" system.

5 Gallon Balliihoo Cider Barrel£34.99
Bung For Hambleton Bard Top Tap Beer Float£1.10
Hambleton Bard Rotokeg Replacement Float£5.10