Tools & Maintenance

Tools And Other Spares For Maintaining, Repairing Or Modifying Your Home Brewing Equipment

Showing 1 to 8 of 8 (1 Pages)
rating

Hole Punch For Airlock Grommets

Steel Punch For Making Holes For Airlock Grommets     Suitable For Punching Plastic Bucket Lids Or Other Plastic Caps     This Is The Correct Size For The Black Airlock And Blanking Grommet - Also Supplied With Our Fermenting Buckets     Not Suitable For The Red "Favorite" Grommet   Tony's Tips Here is the Correct Sized P..

£5.50

Ex Tax: £5.50

7 In Stock
Quantity:
rating

Hole Saw Cutter For Home Brew Taps - 26mm Drill Bit

Hole Cutting Bit - 26mm - 1 inch, The Correct Size For The Common Home Brew Plastic Taps With Backnuts     Ideal For Converting Any Bucket Or Other Plastic Container To A Tapped Fermenter     For Use With A Standard Electric Drill     Quality High Speed Steel   Tony's Tips You just need to know where to drill the Hole! ...

£3.99

Ex Tax: £3.99

5 In Stock
Quantity:
rating

Pressure Test Point Service Kit - For Ballihoo 4" Cap Schrader Valve

Repair Or Recondition The Schrader Valve Test Point On Your Balliihoo 4" Barrel Cap     Comprised Of 2 x Threaded Valve Inners and  a Small Screwriver Style Tool     Simply Locate The Tool Onto The Existing Inner And Twist Anti Clockwise To Unscrew, Replace In Opposite Direction Untill Tight     We Recommend The Inners To Be Re..

£1.49

Ex Tax: £1.49

13 In Stock
Quantity:
rating

Ring Applicator Pliers - For Fitting Valve Seals

These Handy Four Pronged Pliers Evenly Stretch Circluar Rubbers - Making The Fitting Of Replacement Of S30 Valve Seals Quick and Easy -Without Damaging The Rubbers     Slide The Rubber Over The Prongs And Gently Squeeze The Handles Until The Rubber Is Large Enough To Fit Over The Valve     Position Over The Valve And Slide Off Into P..

£8.99

Ex Tax: £8.99

3 In Stock
Quantity:
rating

Seal Pack For Hambleton Bard 4 Inch Barrel Cap

..

£2.50

Ex Tax: £2.50

1 In Stock
Quantity:
rating

Spanner For Fitting Pressure Barrel Taps

"C" Spanner / Wrench For Removing, Replacing Or Just Tightening Barrel Taps     Suitable For Taps Without Backnuts Commonly Fitted To Ballihoo Basic Barrels,  As Well As Youngs, Wilcos And Weltonhurst Barrels     Tony's Tips 'Bout time too! For Years, I have been making all sorts of Rickety Gadgets to tighten those B . . alliihoo Pl..

£8.00

Ex Tax: £8.00

2 In Stock
Quantity:
rating

Yellow Rubber Seal For S30 Safety Valve - For Hambleton Bard Barrels

Replacement Yellow Rubber Band For Safety Valve     Used On Older Roto Kegs And Hambleton Bard Barrels With 4" Caps     Please Note This Is The Seal Only, The Valve Is Not Included   Tony's Tips Never take a chance with Rubbers beyond their sell by date! - Perish the thought.  I have one of these older Rotokegs and need to replac..

£0.49

Ex Tax: £0.49

17 In Stock
Quantity:
rating

Yellow Rubber Seals For Hambleton Safety Valve - Pack Of 10

Replacement Yellow Rubber Band For Safety Valve Pack Of 10     Used On Older Roto Kegs And Hambleton Bard Barrels With 4" Caps     Please Note This Is The Seal Only, The Valve Is Not Included   Tony's Tips Never take a chance with Rubbers beyond their sell by date! - Perish the thought.  I have one of these older Rotokegs and nee..

£4.90

Ex Tax: £4.90

4 In Stock
Quantity:
Showing 1 to 8 of 8 (1 Pages)