Mangrove Jacks - Dual Temperature Controller (UK Version)

£34.99
  • 6 In Stock

 

  • Heating And Cooing Regulator To Aid Beer Fermentation At Controlled Temperatures.
  • UK Version (71142) - Is Supplied With A UK Plug And Instruction Manual.
  • This Handy Controller Has 2 x Socket Inputs On The Rear - 1) Heating Socket = For Plugging In A Heating Device, Usually A Heat Pad Or Belt. 2) Cooling Socket = For Plugging In A Fridge Or Chiller.
  • Temperature Probe Is 1.8m Long, So When Cooling Can Reach The Middle Of Most Fridges To Give An Accurate Temperature Reading.
  • To Adjust The Set Temperature, Hold The "S" Button For 3 Seconds Until F1 Appears On The Screen. While It Displays F1, Hold The "S" Button While Pressing The Up And Down Arrows to The Required Temperature, Then Press The Standby Button To Store.
Specifications
• Temperature Control Range: -50 To 99ºC (-58 To 210ºF)
• Power Supply: 220V AC +/- 10%, 50/60HZ
• Sensor: NTC Sensor
• Relay Contact Capacity: Cooling (10A/250V AC), Heat (10A/250V AC)
• Accuracy: +/- 1ºC (-50 To 70ºC or -58-158ºF)

 

Product Reviews

Write a review

Note: HTML is not translated!
    Bad           Good